Indoor Coils

When It Comes To Your Home Comfort System, There's More To The Story

Take a look at your home comfort system. If you have an air conditioner outside, then you also have an indoor coil and furnace inside. You might say the coil is the other, less visible part of your system. While a coil may be a component that you're not very familiar with, it's just as important to your home's comfort as your air conditioner. And, because the coil was designed to work in tandem with your outdoor unit and furnace, it's important that they match in both size and capacity.

Trane Can Help You Make A Perfect Match

A matched system gives you maximum performance and efficiency. And, that's where Trane comes in. When you install a new Trane air conditioner, your dealer can help you select the right Trane Comfort™ coil to go with it. Remember, your outdoor condensing unit and your indoor coil work together as a team - a new air conditioner's efficiency will be significantly reduced if it's paired with an old, existing coil. And, an older coil, or a non-Trane coil, may even differ in cooling capacity, leaving you with an unbalanced system and higher than necessary utility bills.
 
   
 
A Comfort™ Coil For Every Application.

Trane manufactures an entire series of convertible comfort coils in a variety of sizes, efficiencies and configurations that will work with any installation or application requirement. And, our coils were developed with the same exacting quality standards as the rest of the components of a Trane home comfort system. They were also designed to match Trane furnaces in both fit and finish.

Comfort™ Coil Benefits

Easy To Service And Clean

• Easy door removal
• External service port
• Foil insulation

Just like Trane's outdoor units, Comfort™ coils are available in both standard and high efficiency models

Lasts A Long Time

• Painted finish
• Non-corrosive drain pan
• 5-year internal functional parts limited warranty*

Attractive Design

• Perfect match to furnaces
• Cabinet finish complements system

Flexible Application

• Models for R-22 and R-410A refrigerants available

A Comfort™ Coil Features

Foil Insulation
100% foil insulation provides easy cleaning and quiet operation.
Two-way, Sloped, Non-corrosive Drain Pan
Prevents standing water in drain pan which significantly affects indoor air quality. Non-corrosive material prevents rust.
Easy Access
Makes cleaning and servicing easier which in turn leads to higher efficiency and longer life.
Painted Finish
Provides increased protection from rust and corrosion. Matches furnace in color.
External Service Port
Quicker and easier serviceability.

*Limited Warranty
All Trane indoor coils have a five-year* parts limited warranty. However, if you have indoor coils installed with a Trane XL or XLi outdoor air conditioner or heat pump as part of a complete system the coil will be covered for ten-years** under the outdoor model functional parts limited warranty. *Warranty valid on coils installed after October 1, 2001 and manufactured on or after January 1, 2000. Earlier installations have a one-year limited warranty.

A Comfort™ Coil Features

Why A Clean Coil Makes A Difference

It's not a pretty sight, but unfortunately it's fairly common. If your home's indoor coil has never been cleaned, chances are it could look like this. One of the reasons is that many older coils are difficult to access, so they're harder to clean. Trane Comfort™ coils have been designed with a three-piece door design so they're easy to access for both servicing and cleaning. As you can imagine, a clean coil is a more efficient coil. It's also better for your home's indoor air quality.